Minggu, 03 November 2013

NOKIA 200 FULL FLASH DONE

NOKIA 200 FULL FLASH DONE

MXKEY [MxKey Team HTI PLUS Flasher Interface 4], SN: C086E8A5
Using device: USB ROM and HTI, FW ver: 00.50, SN: 01000A8F
Connection status: UHCI:HUB::USB 1.10 (Full-speed)
Driver: NMWCD, ver: 7.1.32.75
Module ver: 1.0.0.21313(12-12-2012), Library ver: 1.0.0.14337(12-12-2012)
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.46
EBL version: Quantum_Bootloader_10.46_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 0089 8982 - 23280001 [Intel NU48F512,512 Mbits]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35463805788886
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_35463805788886_ back.RPL"
Processing file: rm761__11.95.mcusw
Downloading item CODE:rm761__11.95.mcusw_ebl_psi.fls, num block: 4, size: 25.25 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.453 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.406 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 2.000 s
Erasing area 0x40280000-0x41A7FFFE ...OK
Programming completed in 30.422 s
Checksum verified (0x495E)
Processing file: rm761__11.95.ppm_bg
Downloading item CUSTackage_bg.ppm_ebl_psi.fls, num block: 1, size: 6 MB
Erasing area 0x41A80000-0x4207E536 ...OK
Programming completed in 7.609 s
Checksum verified (0xE1A6)
Processing file: rm761__11.95.image_bg_059N5N5
Downloading item CUSTackage_bg_059N5N5.image.fls, num block: 1, size: 15.38 MB
Erasing area 0x421C0000-0x43E1FFFE ...OK
Programming completed in 20.125 s
Checksum verified (0xA284)
Total time for flashing process(boot+erase+write) was 5 min 23.281 s
Waiting for USB device removal ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia USB Phonet, PORT_ID: 305584CD
Verifying communication to device OK.



Phone type: RM-761 (Nokia 200)
SW version: V 11.95 19-12-12 RM-761 (c) Nokia
Imei plain: 35463805788886-8
Product code: 059N752
Language Pack:
- not available.

Imei net: 35463805788886
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN

Tidak ada komentar:

Posting Komentar